The DSP-7 set a new standard for access and parking detectors. This vehicle detector is available with a NO and a NC relay output. It works on any voltage between 7 and 30 volts - AC OR DC.
The DSP-7 "Fail-Safe" vehicle detector has been specifically designed to handle gates, parking, drive-through, and other access control applications. This detector is useful for many different voltages and applications.
Loop Size - Works on any in-ground inductive loop from 20 to 1200 mH.
Indicators - Separate Power and Detect LED’s. The green Power LED will blink continuously once per second under normal operation. The red Detect LED will turn on solid for a vehicle.
Automatically compensates for large loops and large lead-ins.
The DSP-40S detector will add a new dimension of simplicity to your plug-in detector requirements. This detector has been specifically designed to handle parking, drive-through and access control applications where solid-state outputs are required for both the "Detect" and the "Fail" outputs. This patent pending detector has been specifically designed to handle parking, drive-through and access control applications where solid-state outputs are required for both the “Detect” and the “Fail” outputs.
The New DSP-40S has the flexibility of changing the sensitivity level if necessary.
Works on any in-ground inductive loop from 20 to1500 mH.
Separate Power/Fail and Detect LEDs.
Power interruptions of short duration are ignored. If power fails for approximately 1 ˝ seconds or less the detector “remembers” a vehicle.
Four levels of sensitivity.
Uses 10 to 30 Volts AC or DC, 20 MilliAmps maximum.
The white sensing probe is buried in the ground so it is not noticed by a potential intruder or vandals. The controller is housed in a small relay type
configuration so it is easy to integrate with security control boards, gate and door operators. This product has all the controls and indicators mounted on the front panel of the unit providing for easy access and operation.
This is not a safety device to hold a gate open while parked near the sensor/probe.
Safety - detects moving vehicles in an industrial environment where there are blind areas along the driving path and actuates warning lights.
Energy conservation - detects moving vehicles along a driving path in a warehouse and turns lights on only in the proximity of the vehicle.
Security - detects approaching vehicles or an unauthorized movement of a parked vehicle and actuates alarms, video cameras or vehicle annunciator.